Electrical Wire Cable Wrap Adhesive Lined Tube with Heat Shrink Seal End Caps

  WCAP MINI Cable Waterproof Heat Shrink End Caps is made of radiation resistant polyolefin and inner layer hot melt adhesive.The inner layer of hot melt adhesive enables IP67 level waterproof, moisture proof and sealing functions to block fluids and moisture. The top of the product is pre shrunk for sealing. It complies with the ROHS environmental protection standard, has strong weather resistance, and integrates the dual functions of insulation and sealing. It comes in two colors: black and transparent. The transparent cap can make see the covered parts, the black sealing cap is anti flame.The designed to provide mechanical and environment protection for electrical wire harness. Tough and tensile outer sheath provide stress-release and wear proof protection for the covered part.Mini Waterproof Cable Heat Shrink End Cap is designed to provide mechanical and environment protection for electrical wire harness.

Product Application

  WCAP MINI Cable Waterproof Heat Shrink End Caps are suitable for electrical scenarios that require visual inspection of the internal wire harness state,as well as waterproof, moisture proof and environmental compliance. They can provide mechanical protection, environmental protection and insulation treatment for wire harnesses to avoid electrical safety hazards. Specific applications include end processing of fine wire harnesses inside electronic equipment, sealing of medical device cables, protection of wire harnesses in smart home devices, waterproofing of connecting wire harnesses in photovoltaic equipment, and inspection of communication cable joint marks.

Feature & benefit

1, Shrink ratio: 3:1

2, Inner adhesive: water-proof, damp-proof, sealing

3, Defense against fluid and steam.

4, Good waterproof effect ( IP67 )

Operating indexes

1, First Shrink Temp.: 80 ℃

2, Final Shrink Temp.: 135℃

3, Working Temp.: -45 ℃ to 110 ℃

Up to standard: Approvals: RoHs compliant, weather resistance.

Usage Steps:

1.Cleaning: Wipe the cable or wire end with anhydrous ethanol and let it dry completely.

2.Cap Selection: Choose the appropriate size based on the cable diameter and the End Cap's shrinkage ratio.

3.Capping: Slide the end cap over the cable end. If used with a Heat shrink tube, overlap the end cap with the tube to ensure waterproofing.

4.Heating: Use a heat gun to move uniformly from the closed end to the open end of the cap, ensuring the cap shrinks evenly.

5.Seal Inspection: Stop heating once hot melt adhesive seeps out from the open end.

6.Cooling: Wait for the end cap to cool down completely before proceeding with subsequent operations.

Product Specifications

Standard Colors: Black, Transparent

Specifications can be customized according to customer needs.

Size Selection:

General Recommendation: It is recommended to order the largest available size that can shrink tightly around the component.